Samsung NX58F5700WS Installation Manual page 35

2. Press the number pads to change the temperature
setting to the desired temperature setting. The selected
cooking temperature and the Start indicator will blink on
the display.
3. Press the START pad.
The display will show a blinking •, along with 150 °, Bake,
and the bake element icon, until the oven reaches that
temperature; then the display will just show the actual
oven temperature.
The oven will automatically light after 30~90 seconds and
start preheating.
When the oven reaches the desired baking temperature,
it will beep 6 times.
4. Press the CLEAR/OFF pad to shut off the oven.
The display will show the time of day.
The oven burners require electrical power to operate.
They cannot be lit manually with a match, so the oven
cannot be used during power outages.
To start the broil burners:
To check ignition of the broil burner, touch the Broil Hi/Lo
Pad and then the start pad. After 30~90 seconds, the broil
burner will ignite.
Checking the flame quality:
All combustion flames need to be visually checked to
determine their flame quality.
1. Soft blue flames—Normal for natural gas operation.
2. Yellow tips on outer cones—Normal for LP gas
operation.
3. Yellow flames—Abnormal for any gas operation; call
for service.
If burner flame looks like 3, the range should not be used until it is serviced.
Call for service. Normal burner flames shall look like 1 or 2, dependin on the
gas type you use.
installation instructions _35