External Control Device Setup; Rs-232C Setup; Type Of Connector; D-Sub 9-Pin Male - LG DM2350D Owner's Manual

EXTERNAL CONTROL DEVICE SETUP

RS-232C Setup

Connect the RS-232C (serial port) input jack to
an external control device (such as a computer
or an A/V control system) to control the product's
functions externally.
Connect the serial port of the control device to the
RS-232C jack on the product back panel.
RS-232C IN
(CONTROL & SERVICE)
NOTE
RS-232C on this unit is intended to be used
with third party RS-232C control hardware and
software. The instructions below are provided
to help with programming software or to test
functionality using telenet software. RS-232C
connection cables are not supplied with the
product.
EXTERNAL CONTROL DEVICE SETUP
Type of connector; D-Sub
9-Pin Male
1
6
RS-232C IN
(CONTROL & SERVICE)
No.
1 No connection
2 RXD (Receive data)
3 TXD (Transmit data)
4 DTR (DTE side ready)
5 GND
6 DSR (DCE side ready)
7 RTS (Ready to send)
8 CTS (Clear to send)
9 No Connection
95
5
9
Pin name