LG DM2350D Owner's Manual page 21

When you select the Cable, the Cable
y y
Service Operator selection screen can differ
or not exist by the Cable situation of the
applicable country.
The popup window to select between Service
Operator is only shown initially for the 3 cases
when you accessing the Initial Setting menu,
when you change from Antenna to Cable or
when you access the menu after changing the
Country.
When you want to select between Service
Operator aside from the above 3 cases, you
can do so by selecting SETUP → Cable DTV
Setting → Service Operator.
Acquired certification SO: Sweden(Comhem,
y y
Canal Digital), Denmark(YouSee, Canal
Digital, Stofa), Norway(Canal Digital).
If there are not any Service Operator that you
want, select Other Operators.
If you select "Other Operators", or the selected
country supports "Other Operators" only, it may
take some time to search all the channels, or it
may not search some of the channels.
If some of the channels do not appear, follow
the steps below.
1. SETUP → Auto Tuning → Cable
2. Input additional values such as the
frequency, symbol rate, modulation, and
network ID (You can ask your cable service
provider for the above information).
The following values are needed in order to
y y
search all available programmes quickly and
correctly. The commonly used values are
provided as "default". However, for correct
settings, please inquire of the cable service
provider. When running Auto Tuning in
DVB cable mode, selecting Full will search
through all frequencies to find available
channels. In the case when the programme
is not searched by selecting the Default,
perform the searching by selecting the Full.
However, in the case when the programme
is searched by selecting the Full, the Auto
Tuning time can be taken too much.
» Frequency: Enter a user-defined frequency
range.
» Symbol rate: Enter a user-defined symbol
rate (Symbol rate: Speed at which a device
such as modem sends symbols to a
channel).
» Modulation: Enter a user-defined
modulation. (Modulation: Loading of audio or
video signals onto carrier).
» Network ID: Unique identifier allocated for
each user.
If you select the "- -" of Country Setting,
(Except for Finland, Sweden, Denmark and
Norway)
To watch DVB-C in the countries excluding
Finland, Sweden, Denmark and Norway select '- -'
as the Country in OPTION.
You can select User mode or Full mode in Auto
Tuning.
The corresponding home frequency information
may need to be changed when tuning the User
mode, and the corresponding information depends
on the Cable Service Operator (SO) in service.
During Full mode tuning, some channel may be
restricted for some Cable Service Operator (SO),
and it may take a long time for tuning.
NOTE
Your cable provider may charge for their
y y
services, or require you to agree to its items
and conditions of business.
DVB-C Cable may not operate correctly with
y y
some cable providers.
Compatibility with DVB-C digital cable
y y
broadcasts is not guaranteed.
21
WATCHING TV