Controls - Sharp Carousel SMC0912BS Operation Manual

C O N T R O L S
SETTINg THE CLOCK
When the oven is first plugged in, the display will show "0:00" and a tone will sound. If the AC power ever goes
off, the display show " 0:00" when the power comes back on.
(1) Press " CLOCK ," "00:00" will display.
( 2) Press the number keys to program current time. For example, to set the
clock to 10:12, press
(3) Press " CLOCK " to finish clock setting. ":" will flash and the clock will be lit.
(4) If the numbers are not within the range of 1:00-12:59, the setting will be invalid
until valid numbers are input.
Note:
1. In the process of clock setting, if the "
selected within 1 minute, the oven will go back to the previous setting automatically.
2. If the clock needs to be reset, repeat steps 1- 3.
KITCHEN TIMER MODE
Timer operates as a minute timer, can be set to delay cooking and used to set a holding time after cooking.
However delay cooking cannot be programmed for defrost. Timer operates without microwave energy.
(1) Press " KITCHEN TIMER ," display will show 00:00 , the first hour figure flashes.
(2) Press the number keys and enter the timer time. (The maximum cooking time is 99 minutes and
99 seconds )
(3) Press " START/+30SEC. " to confirm setting.
(4) When the timer time arrives, the buzzer will beep 5 times. If the clock is set, the LED will display the
current time.
Note: 1. The kitchen timer is a timer and will not display the "Clock."
2. When using the kitchen timer, o other program can be set.
The TIMER indicator starts blinking and the display counts down the time remaining in KITCHEN TIMER mode. When
KITCHEN TIMER mode ends, you will hear 5 beeps.
" 1,0,1,2 " or to set the clock at 5:12, press "0,5,1,2"
STOP/C
.
n
ANCEL" button is pressed or if there is no operation
" "
11
.