Philips 42PFL3605/60 User Manual page 15

• [Picture size]: Adjusts the viewing area.
(when set to maximum, you might see
noise or a rough edge of an image.)
• [Horizontal shift]: Adjusts the picture
horizontally for PC-VGA input.
• [Vertical shift]: Adjusts the picture
vertically for PC-VGA input.
Change picture format
1
Press FORMAT.
»
A picture format bar appears.
2
Press to select a picture format.
»
The selected picture format is
activated.
3
Press OK to confirm your choice.
Summary of picture formats
The following picture settings can be
configured.
Note
•
Depending on the format of the picture
source, some picture settings are not available.
[Auto format]: (Not
for HDMI, YPbPr or
PC mode.) Enlarges the
picture automatically to
best fit the screen. The
subtitles remain visible.
[Super zoom]: (Not
for HD and PC mode.)
Removes the black bars on
the side of 4:3 broadcasts.
There is minimal
distortion.
[4:3]: Shows the classic 4:3
format.
[Subtitle zoom]: Displays
4:3 pictures over the full
area of the screen, with
sub-titles visible. Part of
the top of the picture is
clipped off.
[Movie expand 14:9]: (Not
for HD and PC mode.)
Scales 4:3 format to 14:9.
[Movie expand 16:9]:
(Not for HD and PC
mode.) Scales 4:3 format
to 16:9.
[Wide screen]: Scales 4:3
format to 16:9.
[Unscaled]: Available in
selected models with
PC resolution under
1024 x 768, only. Allows
maximum sharpness.
Some distortion may
be present due to the
broadcaster's systems.
Set your PC resolution to
wide screen mode for best
results.
Use smart sound
Use smart sound to apply pre-defined sound
settings.
1
Press SOUND.
»
The [Smart sound] menu appears.
2
Press to select the following settings.
• [Standard]: Adjusts sound settings
to suit most environments and types
of audio.
• [News]: Applies settings for spoken
audio, such as news.
• [Movie]: Applies settings for movies.
• [Custom]: Applies the settings that
were customised in the sound menu.
3
Press OK to confirm your choice.
»
The selected smart sound setting is
applied.
EN 13