AEG 35940 G Operating And Installation Instructions
Hide thumbs
Also See for 35940 G:
- Operating and installation instructions (26 pages) ,
- Operating and installation manual (26 pages) ,
- Operating and installation instructions (26 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG 35940 G
Summary of Contents for AEG 35940 G
- Page 1 34942 G - 35940 G 35941 G - 35944 G Gas hobs Tables de cuisson Gaskookplaten Piani di cottura Operating and Installation Instructions Notice d’utilisation et d’encastrement Gebruiksaanwijzing en Installatievoorschrift Istruzioni per l’uso e l’installazione PERFEKT IN FORM UND FUNKTION...
-
Page 2: Important Safety Information
ENGLISH Important Safety Information You MUST read these warnings carefully before installing or using the hob. If you need assistance, contact our Customer Care Department on 08705 350 350 Installation This hob must be installed by qualified personnel, according to the manufacturer’s instructions and to the relevant British Standards. - Page 3 room in which it has been installed. Ensure there is a continuous air supply, keeping air vents in good condition or installing a cooker hood with a venting hose. When using the hob for a long period of time, the ventilation should be improved, by opening a window or increasing the extractor speed.
-
Page 4: Table Of Contents
Contents Important Safety Information ............2 Instructions for the User .............. 6 Description of the Hob ..............6 Operation ..................7 Maintenance and Cleaning ............8 The Hob Top ................ 8 Pan Supports ............... 8 The Burners ................. 8 Something Not Working? .............. 9 Service and Spare Parts ............... - Page 5 Guide to Use the instructions The following symbols will be found in the text to guide you throughout the Instructions: Safety Instructions Step by step instructions for an operation Hints and Tips This appliance is manufactured according to the following EEC directives: 73/23 EEC - 90/683 EEC - 93/68 EEC - 89/336 EEC - 90/396 EEC, current edition.
-
Page 6: Instructions For The User
Description of the Hob (Mod. 34942 G) 1. Hob Top 2. Rapid Burner 3. Semi-rapid Burners 4. Triple-crown Burner 5. Auxiliary Burner 6. Control knob for back left burner (semi-rapid) 7. Control knob for back right burner (semi-rapid) 8. Control knob for front right burner (auxiliary) 9. -
Page 7: Operation
Take care when frying food in hot oil or fat, as the overheated splashes could easily ignite. If the control knobs become difficult to turn, please contact your local AEG Service Force Centre. Using the Wok Stand A wok stand is provided to enable you to use a round bottomed wok on the hob. -
Page 8: Maintenance And Cleaning
Maintenance and Cleaning Before any maintenance or cleaning can be carried out, you must DISCONNECT the hob from the electricity supply. The hob is best cleaned whilst it is still warm, as spillage can be removed more easily than if it is left to cool. The Hob Top Regularly wipe over the hob top using a soft cloth well wrung out in warm water to which a little washing up liquid has been added. -
Page 9: Something Not Working
Something Not Working? If the hob is not working correctly, please carry out the following checks before contacting your local AEG Service Force Centre. SYMPTOM SOLUTION There is no spark when lighting Check that the unit is plugged in the gas... -
Page 10: Service And Spare Parts
5. Date of purchase CUSTOMER CARE For general enquiries concerning your AEG appliance and for further information on AEG products, contact our Customer Care Department by letter or telephone at the address below or visit our website at www.aeg.co.uk... -
Page 11: Guarantee Conditions
Guarantee Conditions Standard guarantee conditions We, AEG, undertake that if within 12 months of the date of the purchase this AEG appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we... -
Page 12: Instructions For The Installer
Instructions for the Installer Engineers technical data OVERALL DIMENSIONS Width: 860 mm Depth: 500 mm Height: 88 mm Weight: 16 Kg CUT OUT DIMENSIONS Width: 830 mm Depth: 470 mm Thickness: 30 mm SUPPL Y CONNECTIONS Gas: RC 1/2 inch (1/2 inch male) Rear right hand corner Electric: 230-240V 50Hz supply, 3 core flexible cable with non rewireable plug fitted with a 3 amp cartridge fuse. - Page 13 Instructions for the Installer BURNER RAPID SEMI-RAPID AUXILIARY TRIPLE (large) (medium) (small) CROWN TYPE OF GAS POSITION MAX MIN NOMINAL THERMAL POWER (kW) 0.65 0.45 0.33 NATURAL GAS NOMINAL FLOW 20 mbar VALUE = RATE (m 0.286 0.057 0.190 0.038 0.095 0.028 0.381 0.114 37.78 MJ/m...
-
Page 14: Important Safety Requirements
Important safety requirements This hob must be installed in accordance with the Gas Safety (Installation and Use) Regulations (Current Edition) and the IEE Wiring Regulations (Current Edition). Detailed recommendations are contained in the following British Standards Codes Of Practice: B.S. 6172/ B.S. 5440, Par. 2 and B.S. -
Page 15: Installation
Installation CLEARANCES REQUIRED CLEARANCES REQUIRED WHEN FITTING THE GAS HOB WHEN FITTING THE GAS HOB WITHOUT A COOKER HOOD ABOVE WITH A COOKER HOOD ABOVE 700 mm 650 mm 700 mm 420 mm 420 mm 420 mm 420 mm FO 2028* FO 2027* Installation IMPORTANT... -
Page 16: Gas Connection
Installation FO 0814 FO 0264 A) End of shaft with nut B) Washer C) Elbow On the end of the shaft, which includes the G 1/2" threaded elbow, adjustment is fixed so that the washer is fitted between the components as shown in the diagram. -
Page 17: Cut Out Size
Building in Cut Out Size The dimensions of the cut-out are given in the diagram. FO 2407 Building In Building over a cupboard or drawer If the hob is to be installed above a cupboard or drawer it will be necessary to fit a heat resistant board below the base of the hob on the underside of the work surface. -
Page 18: Building Over A Kitchen Unit With Door
Building in ON/OFF SWITCH ON/OFF SWITCH FLEX OUTLET FLEX OUTLET FO 0764 FO 0763 Building over a kitchen unit with door Proper arrangements must be taken in designing the furniture unit, in order to avoid any contact with the bottom of the hob which can be heated when it is operated. -
Page 19: Fitting The Hob To The Worktop
Building in Fitting the hob to the worktop Before fitting the hob into the cut out, a sealing gasket supplied with the hob must be fitted to the edge of the cut out. It is essential that no gaps are left in this seal in order to prevent spillage near the hob seeping into the cabinet below. -
Page 20: Electrical Connections
Electrical connections Any electrical work required to install this hob should be carried out by a qualified electrician or competent person, in accordance with the current regulations. THIS HOB MUST BE EARTHED. The manufacturer declines any liability should these safety measures not be observed. -
Page 21: Permanent Connection
Electrical connections Permanent Connection In the case of a permanent connection, it is necessary that you install a double pole switch between the hob and the electricity supply (mains), with a minimum gap of 3 mm. between the switch contacts and of a type suitable for the required load in compliance with the current electric regulations. -
Page 22: Fault Finding
Fault Finding Blue Brown Green Yellow Preliminary Electrical Systems Check START Blue Isolate appliance Green and carry out: Brown Yellow A: Earth Continuity check. Carry out: Y E S C a r r y o u t : D: Resistance to C : P o l a r i t y c h e c k . - Page 23 Fault finding A. EARTH CONTINUITY CHECK Appliance must be electrically disconnected - meter set on ý (Ohms) x 1 scale and adjust zero if necessary. — Test leads from any appliance earth point to earth pin on plug. Resistance should be less than 0.1 ý (Ohm), check all earth wires for continuity and all contacts are clean and tight.
-
Page 24: Ignition System / Gas Ignition
Fault finding Ignition System / Gas Ignition Y E S Check gas supply at Ignitor does not spark burner Check plug top fuse and Light burner manually replace if necessary Check by pass simmer Check polarity and earth adjusted continuity of supply point Check fitting Check position of the Check earth continuity... -
Page 25: Commissioning
Commissioning Commissioning When the hob has been fully installed it will be necessary to check the minimum flame setting. To do this, follow the procedure below. 1) Turn the gas tap to the MAX position and ignite. 2) Set the gas tap to the MIN flame position then turn the control knob from MIN to MAX several times. -
Page 26: Servicing
Conversion from Natural Gas to LPG It is important to note that this model is designed for use with natural gas but can be converted for use with butane or propane gas providing the correct injectors are fitted and the gas rate is adjusted to suit. Method 1) Ensure that the gas taps are in the 'OFF' position 2) Isolate the hob from the electricity supply... - Page 27 This file has been downloaded from: www.UsersManualGuide.com User Manual and User Guide for many equipments like mobile phones, photo cameras, monther board, monitors, software, tv, dvd, and othes.. Manual users, user manuals, user guide manual, owners manual, instruction manual, manual owner, manual owner's, manual guide, manual operation, operating manual, user's manual, operating instructions, manual operators, manual operator, manual product, documentation manual, user maintenance, brochure, user reference, pdf manual...