Smeg LBW362PCIT User Manual page 70

CHAPTER -9: TROUBLESHOOTING
All repairing operations required for your machine should be carried out by our
authorised service. If your machine requires a repair or if you cannot remove
the fault by the help of the information provided as follows:
• Unplug your machine.
• Turn the water faucet off.
FAULT
Your machine does
not start.
Your machine does
not intake water.
(*) See the chapter regarding maintenance and cleaning of your machine.
POSSIBLE CAUSE
It is not plugged.
Fuses out of order.
Electricity cut-off.
Start/Pause button
not pressed.
Programme dial
'stop' position.
The machine door is
not completely closed.
Water tap is turned off.
Water inlet hose
may be twisted.
Water inlet hose
clogged.
Valve inlet filter
clogged.
The machine door
not completely
closed.
EN -70-
TROUBLESHOOTING
Plug machine in.
Replace the fuses.
Check mains power.
Press on Start/
Pause button.
Switch the programme
button to the desired
position.
Close the machine
door.
Turn your faucet on.
Check water inlet
hose and untwist.
Clean water inlet hose
filters. (*)
Clean the valve
inlet filters. (*)
Close the machine
door.