Soaking; Spinning Dry; Heavy Wash - Samsung WT12J4200MR User Manual

3. Set the WATER INLET SELECTOR.
spin inlet
wash inlet
4. Load laundry in the wash
tub.
5. Fill water in the wash tub
and add the detergent.
6. Set the WASH TIMER.
Set the Wash Timer 1-15 min. (option)
7. After washing,set the DRAIN
SELECTOR KNOB to 'DRAIN'
for draining.

Soaking

1. Place clothes into the WASH TUB.
2. Turn on tap or use bucket to fill the
WASH TUB with desired amount of
water.
3. Put detergent depending on the
water volume and detergent
package indications.
4. Set WASH TIMER to point between
"15" to "35" in the timer.
starts the wash (15 min.) after the
soak (2 to 20 min.) is completed.
repeats the cycle that is
1.5 ~ 2.0 min. turning and
the next 5 min. resting 3 times.

Spinning dry

1. Transfer the clothes into the spin basket and
arrange the clothes evenly.
Bottom of balancer
safety cover
2. Be sure to attach the
safety cover and close the
inner lid.
3. Close the spin dryer lid.
4. Set the SPIN DRYER TIMER 1-5 minutes.
5. Incomplete spining.(Severe vibration or
unbalance) See "When you load ..."on page 9.

Heavy wash

1. Set the WASH SELECTOR KNOB to 'HEAVY'.
2. Supply the proper amount of water as not to
overflow the top of the washing tub.
3. Set the WASH TIMER 10~15
minutes.
4. Drain the water. Set the DRAIN
SELECTOR KNOB to 'DRAIN'.
5. Repeat this cycle until drain water is clean. (2~3
cycles)
6. Be sure lay the drain hose down.
Inner Lid
Safety
Cover
washing procedure _7