Table of Contents
Advertisement
Digital audio preferences
You can set the interpretive broadcasting by an audio explanation.
1
Use
to select Digital audio preferences, then press OK.
Voice guide
Audio accessibility
Caption settings
Audio language
Digital audio preferences
Primary audio selection criteria
To prioritize VI-Visually Impaired streaming or
HI-Hearing Impaired streaming: The setting for
Audio accessibility
handicapped users (Main audio, Visually
Impaired or Hearing Impaired).
To set your preferred language in the audio
Audio language
streaming (English, Spanish or French).
To set TV priority based on either of the above
Primary audio
settings: (Audio accessibility or Audio
selection criteria
language).
Search for channels
Be sure the RF cable is correctly connected to this unit and you are
registered with your cable TV provider when you install cable
channels.
1
Press
and use
to select Setup then press OK.
2
Use
to select Search for channels, then press OK.
3
Use
to select Start, then press OK.
Install channels
You can search and store all channels. If you move the unit to a
different area after the initial setting, it is recommended to perform
Autoprogramming.
4
Use
to select Antenna or Cable, then press OK.
5
Press OK on Start.
When the scanning and memorizing of available channels is
completed, the lowest memorized channel will be displayed.
6
Follow the on-screen instructions to complete the installation.
System searching. Please
wait...
Auto programming may take
more than 20 minutes to
complete.
12
Stop
Digital channels found:
0
Analog channels found:
0
Total progress:
34
Channel settings
1
Press
and use
to select Setup then press OK.
2
Use
to select Channel settings, then press OK.
3
Adjust the following items.
Installation mode
Channel installation
Uninstall channels
Child lock
Change PIN
Digital audio language
Mono/Stereo
Channel installation
Be sure the RF cable is correctly connected to this unit and you are
registered with your cable TV provider when you install cable
channels.
Installation mode
1
Use
to select Channel installation, then press OK.
2
Use
to select Installation mode, then press OK.
3
Use
to select Antenna or Cable, then press OK.
When Antenna is selected, the TV detects antenna signals. It
searches for DTV and analog TV channels available in your area.
When Cable is selected, the TV detects signals supplied by
cable. It searches for DTV, analog TV and cable channels
available in your area.
Uninstall channels
The channels selected here can be skipped when selecting the
channels using CH + / –.
Those channels can still be selected with the NUMBER buttons.
1
Use
to select Channel installation, then press OK.
2
Use
to select Uninstall channels, then press OK.
3
Use
to select the channel you want to remove, then press
OK.
The removed channels are not displayed on the list of favorite
channels.
To reactivate a removed channel, use
38
.
English
then press OK.
Continued on next page.
Advertisement
Table of Contents
