Table of Contents
Advertisement
Sound
Before you begin:
You must set Home in Location.
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes into standby mode.
1
Press
and use
to select Setup then press OK.
2
Use
to select TV settings, then press OK.
3
Use
to select Sound, then press OK.
Auto sound
Picture
Equalizer
Sound
Features
Balance
Sonic Emotion Premium
Installation
Auto volume leveling
Accessibility
TV speakers
Headphone volume
Digital output format
Delta volume
4
Use
to select the item you want to adjust, then press
OK.
The following sound settings can be configured. Depending on the
format of the broadcasting, some sound settings are not available.
To set your TV to a predefined sound setting.
When you adjust the following settings (Equalizer,
Sonic Emotion Premium and Auto volume
leveling), Personal sound will be set automatically.
Personal
Standard
Auto sound
Vivid
Sports
Movie
Music
News
Adjust the tonal quality for each frequency.
Cursor
Equalizer
To adjust each level of tonal quality
Press
BACK to go back to the previous menu.
Adjust the speakers to suit your listening preference.
Cursor
Balance
To adjust the balance of the right and left
speakers
p. 35
The customized settings you
defined using the Sound menu.
For normal TV viewing.
Enhanced sound.
Clear sound for high action.
Powerful sound settings for a
cinematic experience.
Optimized for music playback.
Set the anchor's voice at a
comfortable volume.
Cursor
Cursor
This selects sound modes for more spatial or surround sound
reproduction.
Off
Sonic
Emotion
On
Off
Dialog
Sonic
Enhancement
On
Emotion
Premium
Off
Bass
Enhancement
On
Off
Absolute
3D Sound
On
This function keeps a constant Loudness differential between the TV
commercials and the programs.
Off
Auto volume
leveling
On
You can select the audio output from the unit's speakers or not. If your
amplifier is HDMI link function compatible and connected by an HDMI
cable to this unit, some sound operations such as volume up can be
changed by using this unit's remote control. Make sure Master
EasyLink is set to On.
p. 36
Off
On
TV speakers
Speakers
EasyLink
Adjust headphone volume.
Cursor
Headphone
volume
To decrease or increase volume
You can set the digital audio output format from SPDIF/ARC.
PCM
Digital output
format
Bitstream
If a channel or input device is too loud or too soft, navigate to that
channel or input device.
Cursor
Provides the ability to set a custom volume
level for the current channel or input source.
Delta volume
If the source volume is too loud, set a negative
value (-1 to -12)
If the source volume is too soft, set a positive
value (+1 to +12)
33
To set Sonic Emotion to off
To set Sonic Emotion to on
To set Dialog Enhancement to
off
To set Dialog Enhancement to
on
To set Bass Enhancement to off
To set Bass Enhancement to on
To set Absolute 3D Sound to off
To set Absolute 3D Sound to on
To remove the Auto volume
leveling
To reduce volume differences
between the TV commercials
and the programs
No output sound from the unit's
speakers
To output sound from the unit's
speakers
To control audio output from
your connected EasyLink
compliant devices with VOL + / –
by using this unit's remote
control.
Cursor
To output PCM format
To output audio in its native
format as Bitstream to connected
audio receiver
Cursor
Continued on next page.
.
English
Advertisement
Table of Contents
