Table of Contents
Advertisement
Connecting to an
Amplifier
Connecting Audio Cable
Connect the AUDIO OUT (L/R) on the unit to 2CH
AUDIO IN on amplifier with Audio cable, such as
AUDIO Left/Right with white/red.
Audio Cable
Amplifier/
Receiver
Connecting COAXIAL (digital
audio) Cable
Connect one of the unit's DIGITAL AUDIO OUT
(COAXIAL) jacks to the corresponding jack on your
amplifier.
Rear of the Unit
y If your TV is not capable of handling 96 kHz
sampling frequency, set the [Sample Freq.]
option to [48 kHz] on the setup menu.
y If your TV is not equipped with Dolby Digital
and MPEG decoder, set the [Dolby Digital] and
[MPEG] options to [PCM] on the setup menu.
y If the audio format of the digital output
y To see the audio format of the current disc
y This unit does not perform internal (2
Coaxial Cable
OPTICAL
,
Note
does not match the capabilities of your
amplifier, the amplifier will produce a strong,
distorted sound or no sound at all.
in the on-screen display, press AUDIO.
channel) decoding of a DTS sound track.
To enjoy DTS multi channel surround, you
must connect this unit to a DTS compatible
amplifier via one of this unit's digital audio
outputs.
Connecting
11
Rear of the Unit
Amplifier/
Receiver
2
Advertisement
Table of Contents
