Connecting to an
Amplifier
Connecting Audio cable
Connect the AUDIO OUT on the unit to 2CH AUDIO
IN on amplifier with Audio cable, such as AUDIO
Left/Right with white/red
Amplifier/
Receiver
Audio Cable
Rear of the Unit
Connecting COAXIAL (digital
audio) cable
Connect the COAXIAL (digital audio out) on the
unit to Digital Audio IN (COAXIAL) on amplifier with
COAXIAL cable.
Amplifier/
OPTICAL
Receiver
Coaxial Cable
Rear of the Unit
y If your TV is not capable of handling 96 kHz
sampling frequency, set the [Sample Freq.]
option to [48 KHz] on the setup menu (See page
12).
y If your TV is not equipped with Dolby Digital
and MPEG decoder, set the [Dolby Digital] and
[MPEG] options to [PCM] on the setup menu
(See page 12).
Connecting
11
2