Connecting To An Amplifier; Connecting Audio Cable; Connecting Coaxial Or Optical; (Digital Audio) Cable - LG DVX690H Owner's Manual

y Not all HDCP-compatible HDMI or DVI devices
will work with this unit.
- The picture will not be displayed properly
with non-HDCP device.
- This unit does not playback and TV screen is
changed to black screen.
Resolution Setting
y Depending on your TV, some of the resolution
settings may result in the picture disappearing
or an abnormal picture appearing. In this case,
press RESOLUTION repeatedly until the picture
re-appears.
y Changing the resolution when the unit is
connected with HDMI connector may result in
malfunctions. To solve the problem, turn off the
unit and then turn it on again.
Connecting to an
Amplifier

Connecting Audio cable

Connect the AUDIO OUT on the unit to 2CH AUDIO
IN on amplifier with Audio cable, such as AUDIO
Left/Right with white/red
Audio Cable
VIDEO
Connecting COAXIAL or
OPTICAL (digital audio) cable
Connect the COAXIAL or OPTICAL (digital audio
out) on the unit to Digital Audio IN (COAXIAL or
OPTICAL) on amplifier with COAXIAL or OPTICAL
cable.
y If your TV is not capable of handling 96 kHz
y If your TV is not equipped with Dolby Digital

Connecting HDMI cable

Connect the HDMI OUT on the unit to the HDMI IN
on amplifier with HDMI cable.
Amplifier/
Receiver Connect the HDMI OUT jack on amplifier to HDMI
IN jack on TV with HDMI cable, if the amplifier has
HDMI OUT jack.
Rear of the Unit
Amplifier/
Receiver
OPTICAL
Optical Cable
VIDEO
sampling frequency, set the [Sample Freq.]
option to [48 KHz] on the setup menu (See page
12).
and MPEG decoder, set the [Dolby Digital] and
[MPEG] options to [PCM] on the setup menu
(See page 12).
HDMI Cable
VIDEO
Connecting 11
Amplifier/
2
Receiver
Coaxial Cable
Rear of the Unit
HDMI Cable
TV
Rear of the Unit