Cable Dtv Setting (In Cable Mode Only) - LG 37LV355T Owner's Manual

32
WATCHING TV
Automatically setting up
programme
(Only 22/26/32LK335C, 32/37/42LK455C,
19/22/26/32LV255C, 32/37/42/47LV355C)
Use this to automatically find and store all avail-
able programmes.
When you start auto programming, all previously
stored service information will be deleted.
1
Press Home to access the main menus.
2
Press the Navigation buttons to scroll to
SETUP and press OK.
3
Press the Navigation buttons to scroll to
Auto Tuning and press OK.
4
Select Start to start automatic tuning.
The TV scans and saves available pro-
grammes automatically.
5
When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
NOTE
If the TV scans a blocked programme, you
y y
will be prompted to enter your password to
keep the programme scanned.
The number of programmes that you can
y y
store differs depending on the broadcasting
signal environment.
If you wish to keep on auto tuning select
y y
Start using the button. Then, press the
OK button. Otherwise select Close.
When select Italy in the Country menu, if
y y
the pop up is displayed when the conflicted
programme after Auto Tuning, select a
broadcaster for conflicting programme
number to solve.
Cable DTV Setting (In Cable mode
only)
(Except for 22/26/32LK335C, 32/37/42LK455C,
19/22/26/32LV255C, 32/37/42/47LV355C)
The range that a user can select from the Service
Operator menu differs depending on number of
Service Operator supported by each country, and
if number of supported Service Operator for each
country is 1, corresponding function becomes non-
activation.
1
Press Home to access the main menus.
2
Press the Navigation buttons to scroll to
SETUP and press OK.
3
Press the Navigation buttons to scroll to Cable
DTV Setting and press OK.
4
Press the Navigation buttons to scroll to Serv-
ice Operator or Channel Auto update and
press OK.
5
Select your desired Source.
6
When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
If you select Cable, you can see Cable
y y
DTV Setting menu.
When Channel Auto Update is On, you
y y
can update information for all the pro-
grammes that can be updated, including
the programme currently being watched.
When Channel Auto Update is Off,
y y
you can only update information for the
programme currently being watched.
You can not select the Cable DTV Set-
y y
ting when the service operator is set to
"Ziggo".