Cable Dtv Setting (In Cable Mode Only) - LG LCD TV / LED LCD TV / PLASMA TV Owner's Manual

The following values are needed in order to
search all available programmes quickly and
correctly.
The commonly used values are provided as
"default".
However, for correct settings, please inquire
of the cable service provider.
When running Auto Tuning in DVB cable
mode, selecting Full will search through all
frequencies to find available channels.
In the case when the programme is not
searched by selecting the Default, perform the
searching by selecting the Full.
However, in the case when the programme is
searched by selecting the Full, the Auto Tun-
ing time can be taken too much.
If some channels are not detected when Full
is selected, select the In detail checkbox and
then try tuning again.
• Frequency : Enter a user-defined fre-
quency.
• Symbol rate : Enter a user-defined symbol
rate (Symbol rate: Speed at which a
device such as modem sends symbols to
a channel).
• Modulation : Enter a user-defined modula-
tion. (Modulation: Loading of audio or
video signals onto carrier).
• Network ID : Unique identifier allocated for
each user.
• Start Frequency : Enter a user-defined
start frequency range.
• End Frequency : Enter a user-defined end
frequency range.
Cable DTV Setting (In Cable mode
only)
The range that a user can select from the Service
Operator menu differs depending on number of
Service Operator supported by each country, and
if number of supported Service Operator for each
country is 1, corresponding function becomes non-
activation.
1
Press Home to access the main menus.
2
Press the Navigation buttons to scroll to
SETUP and press OK.
3
Press the Navigation buttons to scroll to Cable
DTV Setting and press OK.
4
Press the Navigation buttons to scroll to Serv-
ice Operator or Channel Auto update and
press OK.
5
Select your desired Source.
6
When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
If you select Cable, you can see Cable
y y
DTV Setting menu.
When Channel Auto Update is On, you
y y
can update information for all the pro-
grammes that can be updated, including
the programme currently being watched.
When Channel Auto Update is Off,
y y
you can only update information for the
programme currently being watched.
You can not select the Cable DTV Set-
y y
ting when the service operator is set to
"Ziggo".
33
WATCHING TV