TROUBLESHOOTING
No image is displayed
Problem
Is the product power cord
connected?
D oes the Out of range message
appear?
D oes the Check signal cable
message appear?
'Unknown Product' message appears when the product is connected.
Problem
Did you install the driver?
'Key Lock On' message appears.
Problem
The Key Lock On message
appears when pressing the
Menu button.
y S ee if the power cord is properly connected to the outlet.
y T he signal from the PC (video card) is out of the vertical or horizontal
frequency range of the product. Adjust the frequency range by
referring to the Specifications in this manual.
* Maximum resolution : 1920 x 1080 @ 60 Hz
y T he signal cable between PC and product is not connected. Check
the signal cable.
y P ress the 'INPUT' menu in the remote Control to check the input
signal.
y S ee if the plug&play function is supported by referring to the video
card user manual.
y The Lock function prevents the OSD settings from being changed
inadvertently. To release the lock, go to Menu and Option and disable
the Key Lock option.
TROUBLESHOOTING
Resolution
Resolution
Resolution
59