Advertisement
VI. Using USB device or SD/MMC
To listen to music or view photo or video, you need
to connect a USB device and/or memory card to
AJL308.
1. Plug a compatible USB device and/or memory
card (SD or MMC card) to USB por t and/or card
slot of AJL308.
➜The folder(s) indicating the inserted device(s)
appears.
2. Press 3 4 to select the folder of USB device (if
present) or memory card (if present).
3. Press OK to open the folder.
➜The set will auto switch to clock mode.
• To switch to music mode, press MUSIC.
• To switch to photo mode, press PHOTO/
VIDEO.
• To switch to video mode, press PHOTO/
VIDEO.
4. Select the file you want to play.
5. Press OK to play.
Helpful hint:
• The set supports DivX and MPEG4 video format.
• You may change still picture display format on the
screen by selecting "Widescreen" or "Normal"
under "Display Format" option in the "General"
menu.
Wide screen
VII. Setting sleep
• In TUNER or MUSIC mode, press SLEEP until
your desired sleep option is displayed.
➜ The current Tuner or Music playback will
continue.
OR,
• In CLOCK or PHOTO/VIDEO mode, press
SLEEP until your desired sleep option is
displayed.
➜ The built-in relaxation music will star t playback.
Helpful hint:
• There are several built-in relaxation music, select
your desired one in the "Sleep Timer Music"
option of the "General" menu.
VIII. Brightness control
• Press REPEAT ALARM /
IX. Screen auto dim
• To turn on auto dim, in the General menu, set On
X. Using the stand
Normal
repeatedly to cycle screen brightness through 4
levels.
To avoid strong light emitting from the unit at
night time, the auto dim function can be used to
adjust the brightness to the lowest level
automatically.
in "Auto Dim Timer", then set desired start time in
" Auto Dim Start", and set desired end time in
"Auto Dim End".
➜ During auto dim time span, press any button to
increase screen brightness, and it will last for 10
seconds.
The set is equipped with a stand on the bottom
panel. To set the unit for a different viewing angle,
take the stand out, then place it back by reversing
(see the figure below) the side of the stand.
BRIGHTNESS CONTROL
Advertisement
