Image Advanced Menu - Optoma EH504 Manual

UsInG THE PRoJECToR

Image advanced menu

noise Reduction
Select a filter sensitivity to be applied on noise. A higher value may improve noisy sources, but it will soften the
image.
‡ Press the
‡ Press the
brilliantColor
TM
This adjustable item utilizes a new color-processing algorithm and enhancements to enable higher brightness while
providing true, more vibrant colors in picture.
‡ Press the
‡ Press the
Dynamic black
Dynamic Black enables the projector to automatically optimize the brightness of the display during dark / light
movie scenes to be shown in incredible detail.
Gamma
This allows you to set up gamma curve type. After the initial setup and fine tuning is completed, utilize the Gamma
Adjustment steps to optimize your image output. Press the
‡ Film: for home theater.
‡ Graphics: for PC / Photo source.
‡ 1.8 / 2.0 / 2.2 / 2.6: for specific PC / Photo source.
‡ Blackboard: This mode should be selected to achieve optimum color settings when projecting onto a
blackboard (green).
‡ DICOM: This mode can project a monochrome medical image such as an X ray radiography, MRI, etc.
Color Temp.
Press the or to select a color temperature from Warm, Standard, Cool, or Cold.
Noise Reduction
Dynamic Black
Gamma
Color Temp.
Color Space
RGB Gain/Bias
Color Matching
Signal
to decrease the noise in the image.
to increase the noise in the image.
to stronger enhance the image.
to less enhance the image.
IMaGE
advanced
Off
Film
Warm
Auto
Exit
or to select the mode.
33
English