Specification - Optoma ML750ST User Manual

Specification

Optical
Maximum resolution
Lighting source
Lens
Image size (diagonal)
Projection distance
Electrical
Inputs
Outputs
Color reproduction
Scan rate
Built-in speaker
Power requirement
Input current
Multimedia
FW based
USB-A port
Micro-SD slot
Mechanical
Installation orientation
Dimensions
Weight
Environmental
conditions
Note:
All specifications are subject to change without notice.
56 English
Description
- Video timing maximum up to 1080p
- Graphic up to WSXGA+ (1680 x 1050) @60Hz
RGB LED (LED life=20,000hrs)
Manual focus
- 25" ~ 200" (with ME travel)
- 50" ~ 100" (focus range with optimized at 60" image size)
- 0.43m~ 3.44m (with ME travel)
- 0.86 m~1.72m (focus range with optimized at 60" image size)
Description
- Universal VGA in x1 (need to use special cable),
- HDMI/MHL in x1,
- USB-A x 1, Micro SD x 1
Headphone out x1
16.7 Million color
- Horizontal scan rate: 15.375~79.796 KHz
- Vertical scan rate: 24~ 75 Hz (120Hz for 3D featured projector)
Yes, 1.5W (Amplifier)
AC Adapter, Input 100 - 240V AC 50/60Hz, Output 19V DC (to
projector), Standby Mode < = 0.5W
AC in 1.5A (DC in 3,42A) max
Description
Linux similar OS
- Support Host mode for USB storage disk(USB 2.0 supported,
up to 64GB).
- Support WiFi dongle
- Support 5V/1A power (Bright mode only 0.5A) for 3C device
- Support Micro SD & SDHC card (up to 32GB)
- Not support SDXC & UHS-I card type
Description
Desktop/Front, Desktop/Rear
112.5 x 105 x 40.5mm (w/o lens ring and rubber foot)
0.45 kg
Operating: 5 ~ 40°C in Bright mode and ECO mode, 10% to 85%
humidity (non-condensing)