User Controls
Using the On-Screen Display
1.
The projector has a multi-language On-Screen Display (OSD) Menu that can be
displayed with or without an input source.
2.
Press the
Menu button on the control panel or the remote control to enter the Main
Menu.
3.
To select an option, press the
remote control.
4.
Use the
or
tings.
5.
To exit the OSD, press the
control.
Main Menu
The Main menu allows you to select the input source, adjust the volume, select the dis-
play mode, and configure the brightness, contrast, image, display, and setup settings.
Input Source
HDMI / MHL, and Media.
Volume
: Adjust the volume.
Note:
Audio output is not supported in VGA mode.
Display Mode
iDevice*, Photo, and ECO.
Note:
*The iDevice option replaces the Cinema option if the input source is HDMI and the
iDevice option (Main > Setup > Advanced) is enabled.
Brightness
: Adjust the brightness of the image.
Contrast
: Adjust the display contrast.
26 English
buttons on the control panel or remote control to adjust the set-
Menu button directly on the control panel or the remote
Input Source
Volume
Display Mode
Brightness
Contrast
Image
Display
Setup
Select
: Select your projector's input source. The options are: VGA,
: Optimize the display image. The options are: Bright, PC, Cinema/
or
buttons on your projector's control panel or
Main
VGA
PC
Exit
Enter