Digitus professional DN-95205 Quick Start Manual

Gigabit poe+ at splitter, 10/100/1000 mbps, 24w

Advertisement

Gigabit PoE+ at Splitter,
10/100/1000 Mbps, 24W

Features

Ethernet Speed: 10/100/1000Mbps Gigabit Half/Full Duplex
PoE Standard: IEEE802.3at
Input: Power + Data In (RJ45)
Output: Data Out (RJ45), DC Out
Plug-and-Play Installation - No configuration necessary
Selectable output voltages: 5V/2A, 9V/2A, 12V/2A
Splits the 48VDC power over RJ45 Ethernet cable into different DC output
Status LED on the device (PoE ready/PoE in-use)
Circuit isolation protection
Maximum power output up to 24W
Support wide input voltage range 34VDC to 57VDC
Thermal cut off
Operating Temperature: 0 to 40℃
Dimensions (L x W x H): 80 x 55 x 23 mm
Weight: 80g
Color: Black
Manual DN-95205

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DN-95205 and is the answer not in the manual?

Questions and answers

Summary of Contents for Digitus professional DN-95205

  • Page 1 Gigabit PoE+ at Splitter, 10/100/1000 Mbps, 24W Manual DN-95205 Features  Ethernet Speed: 10/100/1000Mbps Gigabit Half/Full Duplex  PoE Standard: IEEE802.3at  Input: Power + Data In (RJ45)  Output: Data Out (RJ45), DC Out  Plug-and-Play Installation - No configuration necessary ...
  • Page 2 Description The DIGITUS PoE Splitter provide data and power via a single Ethernet Cable to devices, which are not supporting Power over Ethernet. Just connect the input of the Splitter to a PoE Switch or a PoE Injector and the output side to a non-PoE network device such as an access point, IP Phone or a Camera to provide Power and Data.
  • Page 3 Application Package Content:  1 x Gigabit PoE Splitter  1 x Manual  1 x RJ45 Ethernet cable  1 x DC power cable  1 x 3.5mm Power Jack converter Hereby ASSMANN Electronic GmbH, declares that this device is in compliance with the requirements of Directive 2014/30/EU and the Directive 2011/65/EU for RoHS compliance.

This manual is also suitable for:

Dn-952

Table of Contents