Download Print this page

Digitus professional DN-82024 User Manual

Media converter multi mode to single mode

Advertisement

Quick Links

 
 
 
Media Converter 
Multi Mode to Single Mode 
 
 
 
 
 
User Manual 
DN‐82024  DN‐82124  DN‐82133 
 

Advertisement

loading
Need help?

Need help?

Do you have a question about the DN-82024 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Digitus professional DN-82024

  • Page 1       Media Converter  Multi Mode to Single Mode            User Manual  DN‐82024  DN‐82124  DN‐82133   ...
  • Page 2 Overview  Networks often require conversion from multimode (MM) to  single‐mode (SM) fiber, which supports longer distances than MM fiber.  Mode conversion is typically required when:  Network distance requirements exceed the limit of MM fiber. Lower cost  legacy equipment uses MM ports, and connectivity is required to SM  equipment. A building has MM equipment, while the connection to the  Service Provider is SM. Or MM equipment is in a campus building and  SM fiber is used between buildings    Feature   Supporting IEEE802.3z 100/1000Base‐SX/LX standards   Supporting full‐duplex/half‐duplex transmission mode   Supporting conversion between multi‐mode fiber and single mode  fiber   Supporting direct and transparent transmission of packets at  different lengths    Package Content  1x Media mode converter  1x User manual  1x Power adapter   ...
  • Page 3 Specification  DN‐82133  DN‐82124  DN‐82024    Standard  IEEE 802.3  IEEE 802.3  IEEE 802.3  Speed  100/1000Base‐FX  1000Base‐FX  100Base‐FX  LED  Power x2 LINK A, LINK B  Mode  Multi‐Mode  Multi‐Mode  Connector  SC  SC  Fiber A  SFP slot  Wavelength  850nm  1310nm  Distance  550m  2 km  Mode  Single Mode  Single Mode  Connector  SC  SC  Fiber B  SFP slot  Wavelength  1310nm  1310nm  Distance ...
  • Page 4 LINK/LED Description  LEDs  State  Indications  POWER  Solid on  Power feeding in  Off  No power  Port A multimode fiber signal detects: a valid  LINK A  Solid on  connection established.  Off  Multimode fiber link failed.  Port B single mode fiber signal detect: a valid  LINK B  Solid on  connection established.  Off  Single mode fiber link failed              Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the  shipping  content.  If  the  Declaration  of  Conformity  is  missing,  you  can  request  it  by  post  under the below mentioned manufacturer address. ...

This manual is also suitable for:

Dn-82124Dn-82133