Table of Contents
Advertisement
b)
Setting the timer to turn one or more cooking zones off
Touch the zone you want to set.
Touch the timer control, the timer indicator
show "10".
Set the time by touching the "-" or "+" control
of the timer.
Touching the "-" and "+" together, the timer is
cancelled, and the will show "--" in the minute
display.
When the time is set, it will begin to count
down immediately. The display will show the
remaining time and the timer indicator flash for
5 seconds.
When cooking timer expires, the corresponding
cooking zone will be switched off automatically.
The display will show "H" which means hot.
Note:
a) The red dot next to power level indicator will illuminate indicating that zone is
selected.
b) If you want to change the time after the timer is set, you have to start from step
1.
c)
The method for setting two zones is the same as mentioned above.
Setting the timer to turn more than one cooking zones off
a)
If more than one heating zones use this function, the timer indicator will show the
lowest time.
(e.g. zone 1# setting time of 5 minutes, zone 2# setting time of 15 minutes, the
timer indicator shows "5".)
NOTE: The red dot next to power level indicator will flash.
Set one zone
EN-13
TIMER
TIMER
TIMER
Advertisement
Table of Contents
