Timer Control - Smeg SE232TD Instructions For Installation And Use Manual

Table of Contents

Advertisement

3.3.5

Timer control

You can use the timer in two different ways:
a)
You can use it as a minute minder. In this case, the timer will not turn any
cooking zone off when the set time is up.
b) You can set it to turn one or more cooking zones off after the set time is up.
The timer of maximum is 99 minutes
a)
Using the Timer as a Minute Minder
If you are not selecting any cooking zone
Make sure the cooktop is turned on.
Note: you can use the minute minder even if
you're not selecting any cooking zone.
Touch the timer control, the timer indicator
will flash ; Adjust the timer setting by touch
the "-" or "+" controls. The minute minder
indicator will start flashing and will show in
the timer display.
Touching the "-" and "+" together, the timer
is cancelled, and the "--" will show in the
minute display.
When the time is set, it will begin to count
down immediately. The display will show the
remaining time and the timer indicator will
flash for 5 seconds.
Buzzer will beep for 30 seconds and the timer
indicator shows "- -" when the setting time
finished.
Hint:
a)
Touch the "-" or "+" control of the timer once to decrease or increase by 1
minute.
b) Touch and hold the "-" or "+" control of the timer to decrease or increase by 10
minutes.
c) If the setting time exceeds 99 minutes, the timer will automatically return to 0
minute.
TIMER
TIMER
EN-12
TIMER

Advertisement

Table of Contents
loading

Table of Contents