Beko DFN39531X User Manual page 15

Hide thumbs

Table Of Contents

Table of Contents

Preparation

Use the test strip supplied with the product according to the steps given below to determine

hardness level of your supply water.

Remove the test

Turn on the tap and

strip from the

let the water run for

packet.

about a minute.

After determining hardness level of the supply water:

1. Turn on the machine, press Time Delay and P+/P keys simultaneously. After the countdown

(3,2,1) is displayed keep the keys pressed for a while.

2. Press P+/P key to activate the (r..) position.

3. Using Time Delay key, adjust water hardness level according to the hardness of the supply

water. See "Water hardness level adjustment table" for correct setting.

4. Press On / Off key to save the setting.

Water hardness level adjustment table

Hardness

English Water

Level

Hardness °dE

0th Level

0-5

1st Level

6-9

2nd Level

10-15

3rd Level

16-19

4th Level

20-24

5th Level

25-62

If the hardness level of the supply water is above 90°dF or if you are using well water, then it is

recommended to use water purification devices and special filters.

Since your machine is equipped with an Automatic Water Hardness Detection System,

appropriate salt should be put in the dishwasher when "Salt indicator" illuminates.

If salt is not put in the machine, the Automatic Water Hardness Detection System will not work

properly.

Dishwasher / User's Manual

Hold the test strip in

the water for about

a second.

German Water

French Water

Hardness °dH

Hardness °dF

0-4

0-8

5-7

9-13

8-12

14-22

13-15

23-27

16-19

28-34

20-50

35-90

Remove the test

Wait for 1 minute.

strip from the water

and shake it.

Water Hardness Level Indicator