Table of Contents
Advertisement
Troubleshooting / Devices
The HDMI -HDCP procedure might take a few seconds before •
If the TV does not recognise the device and there is no •
picture, try switching from one device to another and back again
to restart the HDCP procedure. Or switch the device off and
If sound interruptions occur persistently, see the user manual of •
the device to check the output settings. If that does not help,
If a DVI to HDMI adaptor is used, check that an additional •
.audio connection is in place to complete the DVI connection
Check if the connected device supports the HDMI -CEC •
standard and is properly set up. Read the user manual that comes
.Check if the HDMI cable is properly connected •
.Check if EasyLink on the TV and device is switched on •
Make sure that the System audio control in your HDMI -CEC •
audio devices is properly set up. Read the user manual that
The refresh rate of a PC connected to the TV with VGA or •
.DVI to HDMI adapter should set to 60Hz
Check that the correct resolution mode is selected on your •
.PC. See the list in Help > Specifications > Display resolutions
Devices
HDMI connections
.the picture from a device appears
.back on again
.connect an additional audio cable
EasyLink HDMI-CEC
.with the device
.comes with your audio device
PC display
6.5
76
Advertisement
Table of Contents
