Pause Tv And Recording - Philips 50PFL7956K/02 Manual

The USB Hard Drive is formatted exclusively for this TV, you
cannot use the stored recordings on another TV or PC. Do not
copy or change recording files on the USB Hard Drive with any
PC application. This will corrupt your recordings. When you
format another USB Hard Drive, the content on the former will
While watching a TV broadcast from a digital channel, you can
pause the broadcast and continue watching later on. Answer a
phone call or take a break. Meanwhile, the broadcast is stored on
the USB Hard Drive. You can pause a broadcast for a maximum
To pause a TV broadcast, press U (Pause). A progress bar
.To call up the progress bar, press U (Pause) again
.(To switch to TV broadcast again, press S (Stop
Once you switch to a digital channel, the USB Hard Drive starts
storing the broadcast. When you switch to another channel, the
new channel broadcast is stored and the broadcast of the former
channel is cleared. Also when you switch the TV to standby, the
When you start watching a programme of another device - a
connected Blu-ray Disc player or digital receiver - the USB Hard
Whilst recording a programme on the USB Hard Drive, you
Whilst watching a TV broadcast from a digital channel, you can
To replay the last 10 seconds of a TV broadcast, press U
You can press w repeatedly until you reach the start of the
.broadcast storage or the maximum time span
With the progress bar on screen, press T (Rewind) or press Q
(Forward) to select from where you want to start viewing the
stored broadcast. Press these keys repeatedly to change their
35
Pause TV
.time span of 90 minutes
.appears briefly on screen
.(To continue watching, press x (Play
.stored broadcast is cleared
.Drive clears all broadcast storage
.cannot pause a TV broadcast
Instant replay
.easily instant replay the broadcast
.((Pause) and press w (Left
Progress bar
Warning

Pause TV and recording

With this TV you can pause a TV broadcast from a digital
.be lost
.channel. You can pause a TV broadcast to watch it later
Simply connect a USB Hard Drive device to your TV and you
If your TV is connected to the Internet, you can also record or
set a programmed recording of a digital broadcast. In some
Smart USB recording and Pause TV only work with digital TV
To pause a digital broadcast you need to connect a USB Hard
Drive. Use a USB 2.0 compatible Hard Drive device with a
minimum of 32GB Hard Drive space and a minimum writing
speed of 30MB/s. Connect the USB Hard Drive to one of the
First, check if the Programme guide supports recording. With the
Internet connected, press h and select Programme guide. If
there is a Recordings button on the Programme guide page, you
To record programmes, you need a USB 2.0 compatible Hard
Drive with 250GB and a high-speed (broadband) Internet
Read more about connecting to the network in Help > Setup >
Before you can pause or record a broadcast, you must format
Connect the USB Hard Drive to one of the two USB ports on 1
the side of the TV. Do not connect another USB device to the
When the TV is tuned to a digital TV channel, press U (Pause) 3
to start formatting. Formatting will remove all data from the
connected USB Hard Drive. Follow the instructions on screen.
.speed
When the USB Hard Drive is formatted, leave the device
Smart USB recording
.can pause the broadcast
.countries, recording is not supported
What you need
.(channels (DVB broadcast or similar
.two USB connectors on the side of the TV
.can record programmes
.connection to the TV
USB Hard Drive installation
.the connected USB Hard Drive
.other USB port when formatting
.Switch on the device and the TV 2
.connected permanently
Smart TV / Pause TV and recording
3.4
To pause
To record
.Network