4 Using the
humidifier
Humidity indication
The humidifier is equipped with a
built-in smart humidity control sensor.
You can set the target humidity level
at 40%RH, 50%RH and 60%RH. The
humidity level of the surrounding air
displays on the center of the control
panel from 20%RH to 95%RH.
Note
•
A comfortable humidity level is from
40RH% to 60RH%.
•
The accuracy of the humidity indication
is approximately ±10%.
•
It takes some time to measure the
humidity level in the room.
Automatic shut-off
The automatic shut-off gives you a
timely warning when the reservoir needs
refilling. When the water in the reservoir
starts getting low, a red indicator on
the control panel starts blinking to tell
you that it is time to refill the reservoir
(fig. f). It blinks for 30 minutes. After
that, the indicator remains on before the
reservoir is refilled with water.
When the reservoir is empty and
needs to be refilled, the humidifier
automatically shuts off and a red
indicator light turns on. When you
refill the reservoir, the humidifier
automatically turns on again.
Note
•
In sleep mode, the red indicator does
not blink, it turns on when the water
level is low.
8
EN
Turning the humidifier on
and off
1
Put the plug of the humidifier into
the wall outlet.
2
Press the power button
the humidifier (fig. j).
» The current humidity level and
fan speed display on the screen.
3
Press the power button
the humidifier.
Note
•
The humidifier releases very fine invisible
mist, so it is normal that you cannot see
the mist.
•
If the water level in the reservoir is
getting very low, the humidifier stops
humidifying. The red indicator light first
starts blinking and then remains on.
to turn on
to turn off