Philips D125 Manual page 28

Change the PIN/passcode
1
Press / or MENU/OK > [ANSW
MACHINE].
2
Select [REMOTE ACC.] > [CHANGE
PIN], then press MENU/OK to confirm.
3
Enter the old PIN/passcode, then press
MENU/OK to confirm.
4
Enter the new PIN/passcode, then press
MENU/OK to confirm.
5
Enter the new PIN/passcode again, then
press MENU/OK to confirm.
» The setting is saved.
Access the answering machine
remotely
1
Make a call to your home number with a
touch tone phone.
2
Enter # when you hear the announcement.
3
Enter your PIN code.
» You now have access to your
answering machine, and you can listen
to the new messages.
Note
•
You have 2 chances to enter the correct PIN code
before your phone hangs up.
4
Press a key to carry out a function. See the
Remote access commands table below for
a list of available functions.
Note
•
When there is no message, the phone hangs up
automatically if no key is pressed for 8 seconds.
Remote access commands
Key Function
1 Listen to the previous message.
2 Listen to messages.
EN
26
3 Skip to the next message.
6 Delete the current message.
7 Switch the answering machine on.
(not available when you listen to the
messages).
8 Stop listening to the message.
9 Switch the answering machine off.
(not available when you listen to the
messages).