Advertisement
3. Connect to the Share
You will be able to see "MaxNAS" under the workgroup "Workgroup" in your Network Neighborhood
(Windows) or "Network" (MacOS X)
Maxnas
4. Accessing System Administration
The MaxNAS comes pre-configured with the LAN1 Ethernet port set to DHCP (Dynamic Host
Configuration Protocol) and the LAN2 Ethernet port set to a static IP address 192.168.2.100.
The current IP addresses are displayed on the LCD panel, and the default WINS (Windows
Internet Naming Service) for the MaxNAS is "MaxNAS". Included with your MaxNAS is a
discovery wizard for Mac and PC, which allows click-and-select simplicity; simply install
the wizard software, launch it, and the wizard discovers your
MaxNAS for administration. When the wizard is launched,
it will briefly display a welcome window followed by the
main application Interface (Illustrated right) at the Device
Discovery Stage. All discovered MicroNet MaxNAS devices
will appear in the main discovery window. To administer
a MaxNAS, select the unit desired in the device discovery
window click
Start Browser
interface. If the MaxNAS is outside your subnet mask
and unreachable, click
assignment.
5. Logging In
The default User ID and password on the MaxNAS are
UserID:
Password:
Enter userID and password, and click
now ready to administer and customize your MaxNAS.
10-30-2008 Rev 3.0. Copyright © 1999, 2008 MicroNet Technology. All rights reserved.
to launch the web administration
Next
to change the IP address
admin
admin
Login
. You are
Advertisement
