Advertisement
Electrical Safety
Electrical Safety
IMPORTANT
(PLEASE READ CAREFULLY)
FOR THE USER'S PERSONAL SAFETY, THIS
APPLIANCE MUST BE PROPERLY GROUNDED
The power cord of this air conditioner is equipped with a
three-prong (grounding) plug. Use this with a standard
three-slot (grounding) wall power outlet to minimize the
hazard of electric shock. The customer should have the
wall receptacle and circuit checked by a qualified
electrician to make sure the receptacle is properly
grounded.
DO NOT CUT OR REMOVE THE THIRD (GROUND)
PRONG FROM THE POWER PLUG.
Electrical Data
1.Do not use an extension cord with this unit.
2.When the unit is in the OFF position, the power supply to the
electrical controls.
3.Disconnect the power to the unit before servicing
the unit.
4.Remove the power cord from the wall receptacle.
5.Remove or turn off the protective device (fuses or circuit
breaker).
Wirings including installation of the receptacle must comply with
the NEC and local codes, local regulations.
FUSE- Use a time-delay fuse or circuit breaker. Refer to the
nameplate for proper power supply requirements.
Installation (for 60Hz)
• Electric installation requirement for personal safety:
• This equipment must be properly connected to ground.
• Under no circumstances cut or break the grounder conductor.
• We recommend not to use an extension wire or any adaptor with this product.
• Follow the national or local electric codes.
• If the power supply does not fulfill the specifications previously mentioned, call an authorized electrician.
• The aluminum wired in the houses may bring about some problems, call an authorized electrician.
• This unit requires a separated power supply that works only for this application.
PREFERRED METHOD
Ensure proper ground
Tandem
15 A
Perpendicular
20 A
Large Tandem
30 A
Owner's Manual 9
Electrical Safety
exists before use
Advertisement
