Advertisement
Installation
Installation
How to Install the Unit
• There are sharp edges that can cause serious cuts.
• When lifting the air conditioner, it is HEAVY.
Use 2 people to lift this device.
For existing sleeve, you should measure the wall
sleeve dimensions to ensure a correct fit of the
machine, You must install the new air conditioner
according to these installation instructions to achieve
the best performence. All wall sleeves used to mount
the new air conditioner must be in good structural
condition and have the rear grille that securely attaches
to the sleeve or the flange of the sleeve to secure the
new air conditioner.
• To avoid vibration and noise, make sure the unit is
installed securely and firmly.
When installing the sleeve, make certain there is
nothing within 20" of the back that would interfere with
heat radiation and exhaust air flow. The exhausted air
must dissipate freely away from the machine and not
return directly to its intake.
10 Room Air Conditioner
Dimension of air conditioner
Dimension of sleeve assembly (optional)
INSULATION
COOLED
AIR
INTAKE
AIR
1/4" Bubble
of the level
1,066 mm
(42")
406 mm
(16")
318 mm
(12
/
")
1
2
505 mm
(20")
1066 mm
(42")
406 mm
(16")
318 mm
(12
/
")
1
2
SLEEVE
WALL
HEAT
RADIATION
WALL
Over 20"
Advertisement
