Table of Contents
Advertisement
Hotel TV Function
Category
Self Diagnosis
for TV
Self Diagnosis for HTV
SW Update
Service Pattern
System
ATV Cable AGC Gain
DTV OpenCable AGC
Sound Bar Out
Contact Samsung
Standby LED
TV Reset
✎ REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets
you deliver TV firmware updates, cloning data, channel mapping changes, REACH contents, and TICKER contents
through RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are available only in
standalone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed with the
REACH server product for more operating information.
Item
y Enter Self Diagnosis Menu.
Picture Test: Use to check for picture problems. If the problem appears in the test picture,
select Yes and follow the directions on the screen.
y Sound Test: Use the built-in melody sound to check for sound problems. If the problem occurs
during the test, select Yes and follow the directions on the screen.
Lets you check the state of Pro:Idiom and its communication with the SI STB or SBB. If you have
any problems with the Pro:idiom encryption channel or the communications with the SI STB or
SBB, use this diagnosis function. If Pro:Idiom DTV Channel Key Loss appears to have failed and
the Pro:Idim encryption channel has failed to play content, first check the broadcasting systems
related to Pro:Idiom encryption. If your broadcasting system does not have a problem, contact
Samsung Service. If STB SI Vendor Setting appears to have failed and communication with the
SI STB or SBB has failed, first check your SI STB or SBB. If your SI STB or SBB does not have a
problem, contact to Samsung Service.
Lets you upgrade the TV SW with a USB memory stick.
Lets you check the state of the TV picture by displaying picture test patterns. Press the Menu
button to turn off the test patterns and exit.
Lets you control the AGC gain of the analog cable channels. Don't change the default value
unless problems occur.
Lets you control the AGC gain of the digital cable channels. Don't change the default value
Gain
unless problems occur.
If the Samsung Sound Bar device is connected to this TV, this item lets you to select where the
TV sound is outputted when the TV is turned on.
y ON: When the TV is turned on, the TV sound is automatically outputted in the Sound Bar device
only.
y OFF: When the TV is turned on, the TV sound is automatically outputted in the TV speaker
device only.
Display the web site of related Samsung service center, software version, and Mac address
information.
When the TV is in standby mode, you can configure the settings of external LED.
y ON: The LED is on.
y OFF: The LED is off.
Returns all settings on the TV to their factory defaults.
Description
27
English
Advertisement
Table of Contents
