The Connection Panel - Samsung HG43NE590 Installation Manual

Table of Contents

Advertisement

1
2
3
4
✎ Whenever you connect an external device to your TV, make sure that power on the TV and the device is turned off.
✎ When connecting an external device, match the color of the connection terminal to the cable.
USB (5V 0.5A), (HDD/1.0A) / CLONING)
1
– Connector for software upgrades and Media Play, etc.
– Service connection.
HDMI IN
1,
2
(ARC),
3
2
Connects to the HDMI jack of a device with an HDMI output.
✎ No separate sound connection is needed for an HDMI to HDMI connection. HDMI connections carry both audio
and video.
✎ It is recommended that the external device of the HDMI 1.3 or 1.4 version will be used with this TV. If you meet
the compatible problem like no sound or the abnormal screen or etc with the device of the HDMI 1.2 version,
contact to the Samsung customer care center. Refer to page 51 for the information of the Samsung customer
care center.
LAN
3
Connect to a wired LAN using CAT 7 cable.
ANT IN (AIR/CABLE)
4
– To view television channels correctly, the TV must receive a signal from one of the following sources:
– An outdoor antenna / A cable television system / A satellite receiver
EX-LINK
5
Connect this jack to the jack on the optional RJP (Remote Jack Pack). This will allow you to connect external devices
(Camcoder, PC, DVD players etc.) easily.
10
English

The Connection Panel

2
5
6
7
8
9

Advertisement

Table of Contents
loading

Table of Contents