Philips QT4070 User Manual page 8

ENGLISH
8
4 To trim most effectively, move the appliance against the direction of
hair growth.
Note: Make smooth and gentle movements and make sure the surface of the
trimming comb always stays in contact with the skin.
Note: Do not move the appliance too fast.
5 Switch off the appliance after use and clean it (see chapter 'Cleaning').
Creating a stubble look
- Use the trimmer with the trimming comb set to a hair length of
1mm to create a stubble look.
- If you want even shorter stubble of 0.5mm, use the trimmer without
the trimming comb attached.
Trimming without trimming comb
Use the trimmer without trimming comb to trim full beards and
single hairs.
1 Remove the trimming comb.
Note: Never pull at the flexible top of the trimming comb. Always pull at the
bottom part.
2 Make well-controlled movements and touch the hair lightly with the
cutting unit.
Turbo function (BT7085/QT4070 only)
You can use the turbo function for greater suction power and increased
cutting speed.
1 Switch on the appliance.
2 Press the turbo button.
When you switch off the appliance, the turbo function is deactivated
automatically.