Table of Contents
Advertisement
Available languages
Available languages
ENGLISH
, TRIMMING AND EDGING
•
Hold the groomer with the back side of the blade facing you with no
combs attached.
•
Start with the blades resting lightly against your skin, use motions towards
edge of beard line to trim to desired locations in facial area.
•
Shape as desired.
, TRIMMING WITH SHAVING GEL
•
Follow the same instructions as dry shaving if using shaving gel.
, Caution: After use with shaving gel, please rinse the blade under warm
water to clean away any excess gel and debris.
•
To keep the unit in optimal condition we recommend re-oiling the blades
after cleaning. Place a few drops of cutter or sewing machine oil onto the
blades. Wipe off excess oil.
C CARE FOR YOUR GROOMER
•
To ensure long lasting performance of the groomer, clean after each use.
BATTERY REMOVAL
•
The battery must be removed from the appliance before it is scrapped.
•
The appliance must be disconnected from the supply mains when
removing the battery.
•
Ensure the trimmer is discharged of all power.
•
Remove the comb attachment.
•
Detach the blade head.
•
Pry off the bottom gap below the grips.
•
Press in exposed tabs and pull internal frame out.
•
Disconnect the battery from the circuit board and internal frame.
•
The battery is to be disposed of safely.
H ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous
substances in electrical and electronic goods, appliances marked with
this symbol must not be disposed of with unsorted municipal waste,
but recovered, reused or recycled.
5
Advertisement
Table of Contents
