Philips SRP2018/27 User Manual page 8

4
Enter the first 5-digit code using the digit buttons.
5
If the light is off, a valid code is saved. Otherwise, the light will flash
once, and then remains on for code re-entry.
6
Operate the device with the universal remote. If your device
responds correctly, it means you have entered the right code.
Otherwise, repeat from step 2, and enter the second code on the
list.
Note
•
It is possible sometimes that your device only responds to some of the buttons. In
such case, set up with the next code in the code list, and try operating your device
again.
•
Each device button can be used to set up any device. E.g. you may setup a TV using
the BD device button.
6 EN