4
Repeat this step to adjust the channel ratings.
[Parental Rating]: when channels are
•
locked:
•
Enter the four-digit password to
access the channel blocking menu.
•
Enter the four-digit password to view
locked channels.
•
Enter the four-digit password to
access the parental lock menu.
•
[Clear
All]: this function will clear all
previously saved locked channels and signal
sources.
•
The default password is '0000'. Users
may change or set the password
themselves.
Note
•
If you go to a locked channel, you will be prompted to
enter the password.
Adjusting VGA settings
1
Press (Home) and select [Setup] to
Press
enter the [Setup] menu.Then select [VGA
Setting].
» The [VGA Setting] menu is displayed.
2
Press
to select and adjust the settings:
[Auto Adjust]: automatically adjusts the TV
•
to synchronise its resolution with that of
the PC, so that programmes are displayed
in full screen.
•
[H.Position]: adjusts the horizontal
position.
[V.Position]: adjusts the vertical position.
•
[Phase]: adjusts the phase frequency of the
•
VGA signal.
•
[Clock]: adjusts the clock frequency of the
VGA signal.
Tip
•
The [VGA Setting] menu can only be used when
connected to a PC.
EN
12
Playing multimedia files from
USB devices
You can play photo, music or video files stored
on a USB storage device on your TV.
•
Supported storage devices: USB (only
FAT or FAT 32 USB storage devices are
supported)
•
Supported multimedia file formats:
•
Images: JPEG
•
Audio: MP3
•
Video: MPEG 2/MPEG 4, H.264
•
Documents: TXT
Note
•
TP Vision assumes no responsibility if a USB storage
device is not supported, or if the data on the device is
damaged or lost.
Viewing photos and text files and
playing audio and video files
1
Turn the TV on.
2
Connect the USB storage device to the
USB port on the side of the TV.
3
(SOURCES).
Press
4
Select [USB] and press OK.
» The USB browser will open.
Viewing photos
1
Select the photo within the USB browser
and press OK. The photo will be enlarged
to fill the screen.
Press CH- or CH+ to see either the
•
previous or the next photo.
Starting slide shows
1
Select a photo or folder and then press
OK. The photo will be enlarged to fill the
screen.
» The slide show will start playing from
the selected photo.