Porter-Cable FR350B Instruction Manual page 11

DIReCTIOnAl exHAUST DeFleCTOR (FIG. 8)
Adjust directional exhaust deflector (A), so the exhaust
air blast will be directed away from the operator. The
exhaust deflector provides sixteen detented positions
for directing the exhaust blast away from the operator.
Grasp the deflector and rotate it to the desired position
for the current application.
nO-MAR pAD (FIG. 9, 10)
Disconnect tool from air supply and
engage trigger lock, before removing or re-installing
no-mar pad.
The no-mar pad (F) is provided to reduce marring of the work surface. The no-mar pad
can be removed, and stored inside the End Cap, Magazine (M), to provide increased
depth-of-drive for toe-nailing applications.
Fig. 9
F
CleARInG A JAMMeD nAIl (FIG. 1, 11–13)
Disconnect air line from tool, engage trigger lock and remove
fasteners from magazine before making adjustments or personal injury may
result.
If a nail becomes jammed in the nosepiece, keep the tool pointed away from you and
follow these instructions to clear:
1. Disconnect the air supply from the tool and engage trigger lock.
2. Depress pusher release (H) and slide pusher (I) all the way to the front of the
magazine.
3. Depress nail stop (E) and slide fasteners from magazine.
Fig. 11
I
4. If nail is jammed between the driver and nose casting force driver blade back to the
top using a 1/4" (6.4 mm) punch and hammer. When the nail is released it will fall
free or can be removed using pliers.
e
H
Fig. 8
Fig. 10
M
11 - ENG
A