Table of Contents
Advertisement
Using the flash
The default flash setting is auto, but
there are other options.
1
Select
from the left side of
the viewfinder to enter the flash
sub-menu.
2
There are three flash options:
Auto - Your camera will assess the
light available for a good picture
and use the flash as necessary.
Always off - The camera will
never flash. This is useful if you
want to save battery power.
Always on - The camera will
always flash.
3
When you touch the option
you want, the flash menu will
automatically close, allowing you
to take a picture immediately.
4
The flash status icon in the
viewfinder will change based on
the new flash mode.
Adjusting the exposure
The exposure defines the control
of the amount of sunlight entering
the image. A low contrast image
will appear darker, whereas a high
contrast image will appear much
brighter.
1
Touch
.
2
Slide the contrast indicator
along the bar, towards
a lower exposure, darker image
or towards
for a higher
exposure, brighter image.
for
53
Advertisement
Table of Contents
