Advertisement
Operation Features
Operating temperature and humidity
When using the air conditioner follow the operating temperature and humidity ranges.
Mode
Cool mode
Dry mode
Heat mode
CAUTION
• If you use the air conditioner at a relative humidity above 80%, it may cause a formation of
condensation and a leakage of water on the floor.
• The rated heating capacity is based on an outdoor temperature of 45 ˚F ( 7 °C ). If the outdoor
temperature goes down below 32 ˚F ( 0 °C ), heating efficiencies may decrease depending on the
temperature conditions.
• If the indoor unit is out of the operating temperature and humidity range, the safery device may
operate and the air conditioner may stops.
Pairing an indoor unit with a remote control
When using multiple indoor unit, you can control individually pairing remote control and indoor unit.
Set by remote control when the indoor unit is off.
▶
Zone 1~4
NOTE
• After push the
, have to push
• Each indoor unit number setting must be set by the installer when installing. Contact service
centre to reset indoor unit number.
Indoor temperature
64 ˚F ~ 90 ˚F
(18 ~ 32 °C)
86 ˚F (30 °C) or less
▶
▶
within 60 seconds.
Outdoor temperature
Depending on the outdoor
unit specification
(5 sec)
Indoor humidity
80% or less
11
English
Advertisement
