Tv Soundconnect - Samsung TW-J5500/ZA User Manual

TV SOUNDCONNECT

You can enjoy TV sound through your product when it is connected to a Samsung TV that supports the TV
SoundConnect function.
+ Connecting a TV to the product
1. Turn on the TV and product.
• Set the "Add New Device" menu selection of the
TV to "On".
2. Press the SOURCE button on the remote control or
press the ( ) button on the product's front
panel to select the
3. On the TV, a message asking whether to enable the
TV SoundConnect function appears. "[Samsung]
SoundTower" is displayed on the TV screen.
4. Select <Yes> using the TV remote to finish
connecting the TV and product.
● Switching the product's mode from TV to
another mode automatically terminates TV
SoundConnect.
● To connect the product to another TV, the
existing connection must be terminated. To
terminate the existing connection, press and
hold the ENTER(
To connect to the other TV, follow Steps 1
through 4 above.
● The TV SoundConnect (SoundShare) function
is supported by some Samsung TVs released
from 2012 on. Check whether your TV
supports the TV SoundConnect (Soundshare)
function before you begin. (For further
information, refer to the TV's user manual.)
● If your Samsung TV was released before
2014, check the SoundShare setting menu.
● If the distance between the TV and product
exceeds 16.25 ft. (5m), the connection may
not be stable or the audio may stutter. If this
occurs, relocate the TV or product so that
they are within operational range, and then
re-establish the TV SoundConnect
connection.
Connect
TV SOUNDCONNECT mode.
) button for 5 seconds.
REC
● TV SoundConnect Operational Range
- Recommended pairing range: within
19.75 inches (50cm).
- Recommended operational range:
within 16.25 ft. (5m).
● Play/Pause, Next, Prev buttons are not
operable in TV SoundConnect mode.
+ Using the Bluetooth POWER
function with TV SoundConnect.
The Bluetooth POWER function is available after you
have successfully connected the product to a
Bluetooth compatible TV using TV SoundConnect.
When the Bluetooth POWER function is ON, turning
the connected TV on or off will turn the product's
power on and off as well.
1. Connect the TV with your product using the TV
SoundConnect function.
2. Press the Bluetooth POWER button on the
remote control. "ON-BLUETOOTH POWER"
appears on the product's display.
• ON-BLUETOOTH POWER : The product turns on
and off when you turn the TV on or off.
• OFF-BLUETOOTH POWER : The product only
turns off when you turn the TV off.
● This function is supported only by some
Samsung TVs released from 2013 on.
15
FUNCTIONS
TV SOUN