Installing The Stands - Philips 55PFL5602 User Manual

(55PFL5602, 50PFL5602)
1
Open the top flaps of the box.
2
Remove all accessories.
3
Prepare a table and cover the top of it with a table cloth, blanket or
such to avoid damage to the TV set. Support both sides of the TV set
and, move it onto the table.
4
Carefully lay the TV set, with the screen side down, on the table so
as not to deform or damage Decoration plate of the bottom of the
unit.
Protect
the plate
with care

Installing the stands

(65PFL5602)
1
Remove both of the bottom polystyrene foam bases. Carefully tear
the plastic bag until the bottom corner of the TV is exposed.
•
Support the top of the TV set at all times to prevent the TV from
falling.
Caution(s)
•
Before installing the matching stand, remove the protective cardboard and carefully peel away
the film from the area so that it will not get stuck between the unit and the stand.
2
Lift up one side of the TV approx. 1 inch (2.5 cm) and insert the
matching stand upward until it fits the main unit.
3
Fasten the matching stand to the TV with 2 screws (included).
4
In the same manner as step 2, install the other stand.
10
2 screws
required
Continued on next page.
.
English