Emptying Dust Tank - LG V-KC902HTQM Owner's Manual

How to use
Indicator
The dust tank needs emptying when indicator light is on.
• Turn off the vacuum cleaner and unplug it.
• Grasp the handle of the tank and then press the tank
separation lever.
• Pull out the dust tank.
• Empty the tank and then assemble the dust tank as below
Assembling dust tank
First, place the bottom of dust tank on the vacuum cleaner
and tilt.
12
MFL37414301

Emptying dust tank

Plate opening lever
Tank separation lever
Pull out
Tank handle
NOTICE
• If suction power decreases after empting dust tank, clean
dust tank next page
• Since dust tank is full, indicator continues to flash for
2~3 minutes and suction power will decrease for a
while, then vacuum cleaner will turn itself off.
Moving the vacuum cleaner
• Don't grasp the tank handle when you are moving the vacuum cleaner.
The vacuum cleaner's body may fall when separating tank and body.
You should grasp the carrier handle when you are moving the vacuum cleaner.
Tank handle
Dust tank cap
Carrier handle