Page 2
50 lb (23 kg) or more to avoid back injury. All lifting devices (straps, slings, chains, ratchet blocks) must comply with applicable local regulations and certifications. Wallenstein Equipment Inc. cannot accept responsibility for the use of sub-standard equipment and work practices.
Page 29
Pre-delivery Inspection Inspect for damage from shipping. Immediately contact the shipping company if damage is found. Conveyor Engine Starts and Runs Fasteners Tight Conveyor Drive Lubricated Pivot Tongue Moves Freely Review Operating and Safety Instructions Safety Checks All Safety Decals Installed Guards / Shields Installed and Secured Check Crank Jack Function Check Tire Pressure...
Bolt Torque Specifications Checking Bolt Torque Imperial Bolt Torque Specifi cations The tables shown give correct torque Torque Value values for various bolts and capscrews. Bolt SAE Gr. 2 SAE Gr. 5 SAE Gr. 8 Diameter Tighten all bolts to the torque values lbf•ft N•m lbf•ft...
Need help?
Do you have a question about the CT16 and is the answer not in the manual?
Questions and answers