Table of Contents
Advertisement
Problem
Solution
No power.
Make sure that the power adaptor is securely
connected to both the power supply and the CD sound
machine.
Make sure that the power supply is available.
Make sure that batteries are correctly inserted, and
power adaptor is disconnected from the CD sound
machine.
No sound
Adjust the volume level.
or poor
To play audio input from a source other than MP3-
sound.
LINK socket, disconnect the MP3 link cable.
No
Disconnect and reconnect the power adaptor, and then
response
turn on the CD sound machine again.
from the
As a power-saving feature, the CD sound machine
CD sound
automatically switches to standby mode after it keeps
machine.
inactive for 5 minutes. Press
working mode.
No disc is
Insert a disc.
detected.
Make sure that the printed side of the disc faces outwards.
Wait until the moisture condensation at the lens is cleared.
Replace or clean the disc.
8VH D ÀQDOL]HG &' RU D GLVF ZLWK VXSSRUWHG IRUPDW
Radio
Increase the distance between the CD sound machine
reception is
and your TV or VCR.
poor.
Fully extend the FM antenna.
Adjust the position of the FM antenna.
Connect an outdoor FM antenna instead.
to switch it back to
Advertisement
Table of Contents
