Use Your Soundbar; Adjust The Volume; Choose Your Sound; Mp3 Player - Philips HTL2101X User Manual

4 Use your
SoundBar
This section helps you use the SoundBar to play
audio from connected devices.
Before you start
• Make the necessary connections
described in the Quick Start Guide
or download the User Manual from
www.philips.com/support.
• Switch the SoundBar to the correct source
for other devices.

Adjust the volume

1
Press VOLUME +/- to increase or
decrease a volume level.
• To mute sound, press
• To restore the sound, press
again or press VOLUME +/-.
» All Source indicators on the main
unit blink for a few seconds when
a volume is set to the maximum or
minimum value.

Choose your sound

This section helps you choose the ideal sound
for your video or music.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
1
Press SURR ON / SURR OFF to turn on
or turn off the virtual surround sound.
(MUTE).
(MUTE)
Equalizer
Change the high frequency (treble) and low
frequency (bass) settings of the SoundBar.
1
Press TREBLE +/- or BASS +/- to change
the frequency.
» All Source indicators on the main unit
blink twice when treble or bass is set
to the maximum or minimum value.

MP3 player

Connect your MP3 player to play your audio
files or music.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
1
Using the 3.5mm stereo audio cable,
connect the MP3 player to the AUDIO IN
connector on your SoundBar.
2
Press AUDIO IN.
3
Press the buttons on the MP3 player to
select and play audio files or music.

USB storage devices

Enjoy audio on a USB storage device, such as an
MP3 player and USB flash memory, etc.
What you need
• A USB storage device that is formatted
for FAT file systems, and complies with the
Mass Storage Class.
• An MP3 or WMA file on a USB storage
device
1
Connect a USB storage device to the
SoundBar.
2
Press USB on the remote control.
» The play starts after a few seconds.
EN
7