Related Manuals for Philips HTL2100/77
Summary of Contents for Philips HTL2100/77
- Page 1 Always there to help you Register your product and get support at www.philips.com/welcome HTL2100 Question? Contact Philips User manual...
-
Page 2: Table Of Contents
Contents 1 Important Safety Care for your product Care of the environment Trademarks Help and support 2 Your SoundBar Main unit Remote control Connectors 3 Connect Connect audio from TV and other devices 4 Use your SoundBar Adjust the volume Choose your sound MP3 player Auto standby... -
Page 3: Important
• Remove batteries if they are exhausted or immediately. Contact Philips Consumer if the remote control is not to be used for Care to have the product checked before a long time. -
Page 4: Care For Your Product
Care in your country. Before you contact the environment and human health. Philips, note down the model number and Your product contains batteries, which cannot serial number of your product. You can find this be disposed of with normal household waste. -
Page 5: Your Soundbar
2 Your SoundBar Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your COAX SoundBar at www.philips.com/welcome. AUDIO- OPTICAL Main unit This section includes an overview of the main unit. BASS VOLUME TREBLE SURR a SURR indicator Lights up when you select Virtual Surround sound. -
Page 6: Connectors
Rear connectors Mute or restore volume. g BASS +/- Increase or decrease bass. h VOLUME +/- Increase or decrease volume. i AUDIO-IN Switch your audio source to audio input connection (3.5mm jack). j AUX Switch your audio source to the AUX connection. -
Page 7: Connect
3 Connect Option 2: Connect audio through a digital coaxial cable Good quality audio This section helps you connect your SoundBar to a TV and other devices. For information about the basic connections of your SoundBar and accessories, see the quick start guide. -
Page 8: Use Your Soundbar
4 Use your Equalizer SoundBar Change the high frequency (treble) and low frequency (bass) settings of the SoundBar. Press TREBLE +/- or BASS +/- to change the frequency. This section helps you use the SoundBar to play » All Source indicators on the main unit audio from connected devices. -
Page 9: Wall Mount
Koninklijke Philips Electronics N.V. bears no responsibility for improper wall mounting that results in accident, injury or damage. If you have any query, contact Philips Consumer Care in your country. • Before wall mounting, make sure the wall can support the weight of your SoundBar. -
Page 10: Product Specifications
6 Product specifications Note • Specifications and design are subject to change without notice. Amplifier • Total output power: 40W RMS (+/- 0.5 dB, 10% THD) • Frequency response: 20 Hz-20 kHz / ±3 dB • Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted) • Input sensitivity: • AUX: 650 mV • AUDIO-IN: 400 mV Audio... -
Page 11: Troubleshooting
If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www. philips.com/support. Sound No sound from SoundBar speakers. • Connect the audio cable from your SoundBar to your TV or other devices. - Page 12 Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved. HTL2100_77_UM_V1.0...