Table of Contents
Advertisement
English
3
After trimming, press the on/off button once to
switch off the shaver.
4
Clean the trimmer (see chapter 'Cleaning and
maintenance').
5
Close the trimmer ('click').
Cleaning and maintenance
Remove the detachable cord from the handheld
part before cleaning this part in water.
Never use compressed air, scouring pads, abrasive
cleaning agents or aggressive liquids such as petrol
or acetone to clean the appliance.
-
Clean the shaver after every shave for optimal
shaving performance.
-
Regular cleaning guarantees better shaving
performance.
-
Be careful with hot water. Always check if the
water is not too hot, to prevent your hands from
getting burnt.
Note: Water may leak from the socket at the bottom
of the shaver when you rinse it. This is normal and not
dangerous because all electronics are enclosed in a
sealed power unit inside the shaver.
Cleaning the shaving unit under the tap
1
Switch off the shaver and disconnect it from
the mains.
25
Advertisement
Table of Contents
