Audio Edit; Guitar Mode; Set Squelch Threshold - Electro-Voice REV Operating Instructions Manual

Audio Edit

Display:
1. Audio
2. Character Set
Controls:
1. [MENU] returns to main screen
2. [SET] (First time) enters Audio Edit Mode:
A. Starts flashing Audio Setting
B. Selects setting and steps to next field
3. [UP] and [DOWN] change setting that is flashing.

Guitar Mode:

When using the REV-BP as a wireless guitar system, the
Bodypack transmitter and the receiver need to be set in Guitar
mode for optimal performance.
In Audio Edit Screen press [UP/DOWN] to change between
Voice and Guitar.
Press [SET] to save setting.
Press [MENU] to return radio to the previous state.

Set Squelch Threshold:

Display Mode:
Press [SET]
Controls:
1. [SET] disables tone squelch and enables edit mode
(allows squelch level adjustment). Squelch level will flash
in edit mode. Tone Squelch is disabled.
2. [UP] raises the squelch threshold.
3. [DOWN] lowers the squelch threshold.
4. [SET] saves the new threshold.
5. [MENU] (From edit mode) restores threshold to the setting
just after the last time [SET] was pressed.
Audio Edit Guitar Screen
Squelch Edit Screen
-21-
Figure 23
Audio Edit Screen
Figure 24
Figure 25
Squelch Screen
Figure 26
ENGLISH